ONEREEL

홈페이지> 블로그> Where are the cable spools customized

Where are the cable spools customized

November 23, 2022
A good cable reel should meet the following standards: first, it should have a better resistance to external forces. Such materials are basically used in different environments in many cases, so in order to meet your needs, you need to pay attention to this point in many cases. The second point is the safety setting, which should be able to meet your safety needs, Therefore, there should be better special line cards, locking functions and other humanized safety devices, which can reduce the potential safety hazards. The last point is that the whole cable reel should be complete in types, which can be used in different cabins and give better play to its role.

The sealing surface of the cable shaft shall be kept flat and clean at all times, so that the installation can be more solid. If there is oil stain or rust, it must be cleaned.

fullyi machined steel spool

Faults of cable reel and causes:
1. Leakage. Cause: damp or water; The wire at the plug end is exposed; be damaged; The protective grounding wiring is incorrect.
2. The circuit is not connected. Cause: the socket is too loose and the plug is not contacted; The screws at the connection of socket leads fall off; Open circuit of power lead; The crimping screw of the plug is loose or the solder joint is loose, and the wire head falls off when the wire is stressed.
3. Poor contact. Causes: loose crimping screws of plugs or faulty solder joints; The power cord at the root of the plug is broken internally; The screws at the connector of the socket lead are loose or the lead is corroded; The plug socket is too loose; The quality of the socket is poor.

4. Causes of short circuit: the wire head is exposed too long in the socket or plug or has burrs; Crimping screw of the wire leaving the socket or plug; The two sockets of the socket are too close to each other to touch the wire.

fullyi machined steel spool

5. Damaged. Cause: the rubber cover is damaged due to the impact of external force; Burn the socket copper strip or connecting column due to short circuit; The plug and socket are aging after being used for a long time.


http://www:spool-manufacturer.com

우리를 동요하십시오

작가:

Mr. Garfield Lee

이메일:

sales@onereel.cn

Phone/WhatsApp:

+8613777009159

인기 상품
블로그 뉴스
당신은 또한 좋아할 수도 있습니다
관련 카테고리

이 업체에게 이메일로 보내기

제목:
이메일:
메시지:

귀하의 메시지 MSS

홈페이지

Product

Whatsapp

우리에 대해

문의

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

송신